Keep your vehicle looking brand new with SunTek Paint Protection Film (PPF). At Clean Image, we use industry-leading SunTek films to provide an invisible layer of defense against everyday damage while preserving your vehicle’s showroom shine.
Packages
Level 2 Protection Package
- Partial Hood
- Partial Fenders
- Full Front Bumper
- Mirrors
Complete Protection Package
Our most comprehensive and complete coverage to protect all the painted surfaces of your vehicle.
Matte PPF Package
Our matte finish film is expertly designed to match your factory paint perfectly.
Add-Ons
A Pillars + Roof Strip Protection
Mirrors Protection
Trunk Applique Protection
Rocker Panels Protection
Headlights Protection
See Our PPF Work In Action
Watch our experienced installers apply SunTek Paint Protection Film and see the precision involved in creating a clean, nearly invisible finish. The video highlights key stages of the installation process, from carefully preparing the painted surface and positioning the film to shaping it around the vehicle’s curves, smoothing it into place and finishing the edges.
Why Choose SunTek Paint Protection Film?
SunTek Paint Protection Film provides a nearly invisible layer of protection between your vehicle’s factory paint and the hazards encountered during everyday driving. Constructed from durable urethane film, it helps absorb impacts and surface damage before they reach the clear coat and paint underneath.
Whether you want to protect the most vulnerable areas of your vehicle or cover every painted surface, SunTek PPF delivers an effective combination of impact resistance, optical clarity and lasting appearance.
Protection Against Rock Chips and Road Debris
Your vehicle’s front bumper, hood, fenders, mirrors and rocker panels are constantly exposed to loose gravel, sand, insects, road salt and other debris. SunTek PPF acts as a sacrificial barrier, helping protect these high-impact areas from chips, scratches and abrasions that could otherwise require costly paint correction or refinishing.
Heat-Activated Self-Healing Technology
Light scratches, swirl marks and surface marring can develop through washing and normal use. SunTek PPF features a self-healing top coat that allows many minor surface marks to disappear when exposed to warmth from the sun, the vehicle’s engine or warm water. This helps the film maintain a smoother, freshly installed appearance over time.
Advanced Stain Resistance
SunTek PPF Ultra incorporates HydroResist™ technology, which helps limit the accumulation of moisture, dirt and contaminants on the film’s surface. This added resistance makes it more difficult for insects, bird droppings, tree sap, road grime and other environmental contaminants to leave lasting stains.
Exceptional Clarity and Gloss
SunTek PPF is engineered to blend naturally with your vehicle’s finish. Its optical clarity allows the original paint color, metallic flake and depth to remain visible while adding a smooth, high-gloss appearance. Once professionally installed, the film is designed to be virtually unnoticeable.
Protection Without Permanently Altering Your Paint
Unlike repainting or making a permanent exterior modification, PPF is applied over the original finish and can later be professionally removed. This makes it an excellent choice for new vehicles, luxury and exotic cars, collector vehicles, daily drivers and leased vehicles whose factory paint you want to preserve.
Easier Exterior Maintenance
The smooth, stain-resistant surface helps prevent dirt and road grime from bonding as aggressively to the vehicle. Regular washing is still necessary, but a protected vehicle can be easier to clean and maintain than exposed factory paint.
Gloss and Matte Finish Options
SunTek PPF can preserve the glossy appearance of your factory paint or give the vehicle a distinctive satin finish. SunTek Ultra Matte provides the protective and self-healing benefits of PPF while creating a smooth matte appearance, making it suitable for protecting factory matte paint or transforming selected glossy panels.
Long-Term Warranty Protection
Professionally installed SunTek PPF Ultra is backed by a manufacturer’s 10-year limited warranty against covered issues such as cracking, bubbling and yellowing. This provides added confidence that your investment is supported for years after installation.
From daily highway driving to weekend adventures, SunTek Paint Protection Film helps preserve the appearance and integrity of your vehicle without hiding the finish that made you choose it. It is a practical way to reduce everyday paint damage, simplify maintenance and keep your vehicle looking newer for longer.
SunTek PPF Options We Offer
Paint Protection Film does not have to be an all-or-nothing investment. Clean Image offers several SunTek PPF coverage options, allowing you to protect the areas most vulnerable to damage or create a nearly invisible protective barrier over the entire vehicle. Our team can help you choose the right coverage based on your driving habits, vehicle type, desired appearance and budget.
Partial Coverage
Partial PPF coverage focuses protection on specific areas that regularly encounter rocks, insects, road debris and everyday wear. Depending on your vehicle and protection goals, this may include the front bumper, leading edge of the hood, partial fenders, side mirrors, rocker panels or other high-impact surfaces.
This option provides valuable protection where damage is most likely to occur while keeping the project more economical than broader coverage. It is a practical choice for daily drivers, leased vehicles and owners who want to address a few particularly vulnerable areas.
Best for: Targeted protection, lower-cost coverage and vehicles primarily driven around town.
Full Front Protection
Full front protection covers the surfaces that take the greatest amount of abuse during highway and everyday driving. A typical full-front installation includes the entire hood, front bumper, front fenders and side mirrors. Headlight protection may also be included or added, depending on the selected package.
Covering complete panels rather than only their leading edges creates a more uniform appearance and eliminates visible seams across the hood or fenders. Full-front PPF is one of the most popular choices for new vehicles because it provides substantial protection against rock chips and road debris without requiring a complete vehicle wrap.
Best for: New vehicles, frequent highway driving and comprehensive protection across the entire front end.
Complete Vehicle Protection
A complete PPF wrap covers virtually every painted exterior surface of the vehicle. This provides the highest level of protection against rock chips, minor scratches, road debris, environmental contaminants and the wear that gradually develops through regular driving and washing.
Full-body coverage is especially valuable for luxury, exotic, performance and collector vehicles, as well as owners who want to preserve as much of the original factory finish as possible. Because the film protects complete panels throughout the vehicle, it also creates a consistent appearance and simplifies long-term exterior maintenance.
Best for: Maximum coverage, premium vehicles and owners who want to preserve the entire factory finish.
Matte Finish PPF
SunTek matte PPF combines paint protection with a smooth satin appearance. It can be used to protect factory matte or satin paint without adding unwanted gloss, or it can transform glossy paint into a distinctive matte finish without permanently repainting the vehicle.
The film retains the protective and self-healing qualities associated with SunTek PPF while giving the exterior a more customized appearance. Matte PPF may be installed over the entire vehicle or used selectively on areas such as the hood, roof, mirrors or other accent panels. SunTek Ultra Matte also incorporates a stain-resistant HydroResist™ top coat and is backed by a manufacturer’s 10-year limited warranty.
Best for: Protecting factory matte paint or creating a custom satin appearance on glossy vehicles.
Custom Coverage and Add-Ons
Protection can also be customized beyond the primary packages. Frequently requested add-ons include headlights, rocker panels, A-pillars, roof strips, side mirrors and rear bumper or trunk-loading areas. These surfaces are especially susceptible to impacts, scratches, shoe scuffs, loading damage and debris thrown from the tires.
Custom coverage allows you to build a package around the way you actually use your vehicle. Whether you need focused protection for a daily commute, additional coverage for highway travel or a complete wrap for long-term preservation, Clean Image can recommend a SunTek PPF solution tailored to your priorities.
Expert Installation Matters
Even the highest-quality paint protection film can only perform as intended when it is installed correctly. Proper preparation, precise fitment and careful finishing are essential for creating a clean appearance and dependable protection. At Clean Image, our experienced installers approach every SunTek PPF installation with close attention to the details of your vehicle.
Before the film is applied, the painted surfaces are thoroughly cleaned and prepared to remove dirt, wax, oils and other contaminants that could become trapped beneath the film. Any necessary paint preparation is addressed before installation so the PPF can bond evenly and maintain a smooth, clear finish.
Using precision-cut patterns and advanced installation techniques, we carefully shape and position the film around the curves, contours and body lines of your vehicle. Whenever the panel design allows, edges are carefully wrapped or discreetly finished to minimize visible seams and create a more factory-like appearance.
Proper installation also helps prevent common problems such as trapped contamination, lifting edges, excessive stretch, misaligned panels and unnecessary seams. Particular attention is given to complex areas such as bumpers, mirrors, headlights, air intakes and sharply curved body panels, where installer experience makes a significant difference.
Once the film has been applied, each protected panel is inspected for alignment, clarity, edge adhesion and overall finish. We also explain the initial curing process and provide care instructions to help you protect your investment. Some moisture or light haziness may be visible immediately after installation, but this normally improves as the film dries and fully bonds to the painted surface.
From partial front-end coverage to a complete vehicle wrap, our goal is to deliver SunTek PPF protection that follows your vehicle’s lines, preserves its original appearance and provides reliable defense against everyday road damage for years to come.
Protect Your Vehicle with SunTek PPF
Your vehicle’s paint begins facing potential damage the moment it leaves the dealership. Rock chips, loose road debris, insects, environmental contaminants and everyday wear can gradually diminish the appearance of even a carefully maintained vehicle. SunTek Paint Protection Film provides a durable, nearly invisible barrier that helps protect the original finish without changing the color or character of your vehicle.
With self-healing surface technology, excellent optical clarity and a stain-resistant top coat, SunTek PPF helps your paint maintain a cleaner, smoother and newer-looking appearance. The film absorbs much of the everyday abuse that would otherwise reach the clear coat, helping reduce visible scratches, chips and surface damage while making routine exterior care more manageable.
Whether you need focused protection for the front bumper and hood, full-front coverage for frequent highway driving or complete protection across the entire vehicle, Clean Image can create a package that fits your needs. We also offer matte PPF and customized coverage for vulnerable areas such as rocker panels, mirrors, headlights and rear loading surfaces.
Protecting your vehicle early can help preserve its factory finish, reduce the need for future paint correction and support its long-term appearance and value. Contact Clean Image today to learn more about SunTek PPF, compare available coverage options and schedule a professional installation for your car, truck or SUV.
Frequently Asked Questions
Find answers to common questions about SunTek Paint Protection Film, including coverage options, durability, maintenance, appearance and the installation process.
What is paint protection film (PPF)?
PPF, often called “Clear Bra,” is a transparent, virtually invisible urethane film applied to high-impact areas of your vehicle (like the hood, bumper, mirrors or the entire car). It acts as a sacrificial shield to protect your paint from rock chips, road debris, and physical scratches.
What makes SunTek PPF special?
SunTek PPF offers self-healing technology, hydrophobic surfaces, and excellent optical clarity — protecting your vehicle’s paint while enhancing its appearance.
Does SunTek PPF really "heal" itself?
Yes. SunTek PPF features heat-activated self-healing technology. Minor scratches and swirl marks on the film will disappear when exposed to heat from the sun or a vehicle engine. This keeps the film looking glossy and smooth over time.
What is the difference between PPF and ceramic coating?
Think of PPF as physical protection and Ceramic Coating as chemical protection.
- PPF prevents rock chips and deep scratches.
- Ceramic Coating provides gloss, hydrophobicity (easy cleaning), and UV protection.
- Pro Tip: For the ultimate defense, we often apply GYEON Ceramic Coating on top of SunTek PPF.
Can I ceramic coat over PPF?
Yes. Applying a ceramic coating over PPF is recommended to boost gloss, hydrophobic performance and ease of cleaning.
How do I care for PPF?
Wait a few days after installation before washing. Hand washing with soap and water is best.
Will the film turn yellow over time?
No. We use SunTek Ultra films which are engineered to resist yellowing and staining. They are backed by a 10-Year Manufacturer’s Limited Warranty ensuring the film maintains its clarity and durability.
Can the film be removed later?
Yes. PPF is designed to be permanent but can be safely removed by a professional without damaging your factory paint, revealing the pristine finish underneath.
How long does PPF installation take?
Installation time depends on the vehicle, selected coverage package, panel complexity and the amount of surface preparation required. A smaller protection package may be completed more quickly, while full-front or complete-vehicle coverage requires additional installation and curing time. Clean Image can provide a more accurate timeframe after reviewing your vehicle and chosen package.
Will PPF hide existing scratches, chips or paint defects?
PPF is transparent, so existing paint imperfections may remain visible beneath the film. Before installation, we inspect and prepare the covered surfaces and can recommend paint correction or touch-up work when appropriate. For the best appearance, visible defects should generally be addressed before the film is applied.
Can PPF be installed on a repainted panel?
SunTek PPF is designed primarily for installation over original factory paint. Tell us if any panels have been repaired or repainted so we can evaluate them before installation. SunTek notes that its limited warranty does not apply when PPF is installed over repainted or aftermarket-painted surfaces, and fresh paint typically needs time to cure before film can be considered.
Is Paint Protection Film completely scratch-proof?
No film can make a vehicle completely resistant to every scratch, impact or form of damage. SunTek PPF helps defend against common hazards such as rock chips, road debris, insects, light scratches and minor abrasions, but particularly sharp objects or severe impacts can penetrate the film.
Does PPF change the color or appearance of my vehicle?
Clear SunTek PPF is engineered for excellent optical clarity and is designed to preserve the appearance of the paint beneath it. Gloss film maintains a glossy factory-style finish, while SunTek Ultra Matte can protect factory matte paint or give glossy paint a smooth satin appearance.
Can PPF be applied to headlights?
Yes. Headlight protection is available as part of select packages or as an add-on. Film applied to compatible headlights can help protect their surfaces against road debris, minor impacts and everyday wear. Clean Image currently offers headlights as a listed PPF add-on.
Will there be visible seams or edges?
The visibility of edges depends on the selected package, the shape of the panel and whether complete or partial coverage is being installed. Full-panel coverage generally provides a more seamless appearance than partial coverage because it avoids a film line across the middle of a hood or fender. Our installers use precision-cut patterns and carefully finished edges to keep the installation as discreet as possible.
What happens if one section of PPF becomes damaged?
Because PPF acts as a sacrificial protective layer, the film may absorb damage that would otherwise affect the paint. In many cases, the damaged film can be removed and replaced on the affected panel without replacing PPF across the entire vehicle. The area should be inspected first to determine whether the damage is limited to the film.
Can I take a PPF-protected vehicle through an automatic car wash?
SunTek recommends hand washing with soap, water and a soft cloth. Automatic car washes and pressure washers should be avoided because brushes or concentrated water pressure may catch an edge and cause the film to lift. SunTek also recommends waiting at least three days after installation before washing the vehicle.
Is PPF only worthwhile for new or expensive vehicles?
No. PPF can benefit new vehicles, daily drivers, performance cars, trucks and older vehicles with well-maintained paint. The ideal coverage depends on how the vehicle is driven and where damage is most likely to occur. Partial or full-front coverage can provide practical protection without requiring a complete vehicle wrap.
When is the best time to install PPF on a new vehicle?
Installing PPF early helps protect the factory finish before rock chips, scratches and road wear begin to accumulate. However, even a vehicle that has already been driven can be protected after its paint has been properly inspected, cleaned and prepared.